Rycote

Modular Windshield WS 7 Kit

Product Code: 086007

The Modular Windshield 7 Kit is suitable for shotgun microphones from 401mm up to 450mm in length and 19-34mm diameter with a 3-pin XLR connector.


Main Benefits:

  • Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations
  • The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology

Where to Buy
Sharing Options

The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.

Modular Suspension

Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.
Windshield

The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.

Windjammer

The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.
The Modular Windshield 7 Kit is suitable for shotgun microphones from 401mm up to 450mm in length and 19-34mm diameter with a 3-pin XLR connector.

Windshield Body Length: 500mm (WS4 + Extension 170mm)
Total Windshield Length: 610mm (includes the End Caps)
Height of Windshield 100mm
Net Weight:
Gross Weight:
Windjammer Fur Length: 40mm
Windjammer Fur Colour: Grey
Microphone Connector: XLR-3F
Max Wind-noise Attenuation: 50 dB


Finding the correct Windshield Kit will depend on the type, length and diameter of the microphone.

Because the whole microphone is encased in a windshield basket the total length of the microphone including the XLR cable must be accounted for, this means adding 50mm to the length of the mic.

For a windshield to work effectively the microphone should be mounted centrally within the windshield, therefore the microphone + XLR length should approximately equal the windshield body length. The body length of our windshields is the total length, excluding end caps.



AKG CK 68 ULS C460B FullA CMS/ULS series preamplifier (now superseded by the ULS C480B) for use with several CK series capsules. A thread adapter allowed the...
Audio-Technica AT 815b (AT8015)http://www.microphone-data.com/microphones/at815b/

(free registration required)
Sennheiser ME 67 K6Long shotgun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used w...
Sony C74Supercardioid shotgun condenser microphone with two position low-cut switch. It is an RF condenser design for low noise.
1 x Connbox CB1 (XLR-3F)
Product Code: 016901
Suitable for mono microphones with 3-pin XLR.

More About This Product


1 x XLR Holder MK II
Product Code: 048493
The XLR Holder Mk II fits between any 3/8" male threaded boom pole or mic stand and any 3/8" female microphone shock-mount or windshield system

More About This Product


1 x Boom Poles Adaptor
Product Code: 048402


More About This Product


1 x Pistol Grip Handle with Lever
Product Code: 048401


More About This Product


1 x Windshield WS 4
Product Code: 010604
Suitable for mic lengths 246mm up to 280mm in length,

More About This Product


1 x Extension 3
Product Code: 010703
Windshield Extension to make WS 7

More About This Product


1 x Windjammer WJ 7
Product Code: 021507
Suitable for use with the Windshield 4 and Ext 3

More About This Product


1 x Suspension Large (XLR-3F) 72 Duo
Product Code: 040151
Suitable for long shotgun mics in a WS 7, 8, 8J or 11

More About This Product




2x Duo-Lyre 72 (19/34)
2x Single Lyre 82 (19/25) (as spare)
Brush
Hex head key

Duck Raincover

Duck Raincover from Rycote on Vimeo.


Connboxes (Mono & Stereo)

Connboxes (Mono & Stereo) from Rycote on Vimeo.


Lyre Suspension Types

Lyre Suspension Types from Rycote on Vimeo.


Rycote Originals - The Lyre® Microphone Suspension

Rycote Originals - The Lyre® Microphone Suspension from Rycote on Vimeo.


Modular Windshield Kit.pdf
Modular Windshield Kit

Modular Windshield Kit_08_14.pdf
Modular Windshield Kit (update 08_14)

WS7kit_086007_040151.pdf
Spares for the Modular Windshield 7 Kit (086007) (

FAQ Categories


Product Code(s)

Modular Windshield WS 7 Kit

Suitable for shotgun microphones from 401mm up to 450mm in length.

Product Code: 086007