Rycote

Triangular White Mic Flag

Product Code: see Product Code(s)

A three-sided, white, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.


Main Benefits:

  • Fits A Wide Range Of Microphones
  • Lightweight But Tough

Where to Buy
Sharing Options

Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

Fits A Wide Range Of Microphones

With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

Lightweight But Tough

Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

If you want your branding seen on screen, use Rycote’s Mic Flags!
Mic Flag - Triangular
A three-sided triangular mic flag, suitable for microphone with 19 to 38 mm diameters. The outer casing is made from a shatter-proof plastic designed to allow perfect display of branding logos. In contrast to all other mic flags, the Rycote mic flag does not use foam to hold the microphone. Instead the mic flag can grip microphones from 19 to 38 mm diameter, with removable rubber "vanes". The mic flags are available in black or white, either in single or multi-packs (5 pcs/pack).

For mics, ø19.0 mm (ø 3/4") to ø32.0 mm (ø 1-1/4") - all vanes fitted
For mics, ø32.0 mm (ø 1-1/4") to ø38.0 mm (ø 1-1/4") - remove every other vane*

Specifications
Dimensions: 95 mm wide faced triangle x H 55 mm
Weight : 87 grams (3 oz)
Printable Area for label: 3 sides of W 89.5 x H 48.0 mm






Audio-Technica AT 8004Ideal for interviews, sports-casting and as the 'mono' mic when used in conjunction with a stereo microphone, the AT804 has a rugged ...
BeyerDynamic M 58Designed for ENG location work, with an extra long handle and a Nextel non-reflective finish.
BeyerDynamic MCE 58High output level microphone for location recording, allowing direct connection to portable DAT and MiniDisc recorders. The XLR is wi...
Electrovoice 635 N/DNeodymium magnet version of the 635 'hammer'.
Electrovoice RE 50A well-known omni microphone for broadcast use. The RE50 is exceptionally well shock-isolated and very robust.
Sennheiser MD 46Designed for audio journalists and field reporters, the Sennheiser MD 46 offers a host of advantages. Its extended frequency response...
Sennheiser MKH 20An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output, switched pre-attenu...
Sennheiser MKH 70An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output and switchable pre-a...
Sennheiser SKM with Evolution or Neumann KK capsulesThe SKM and Evolution series handheld microphones and capsules have all been created in the best tradition of German engineering and ...
Shure SM 58Unidirectional dynamic vocal microphone designed for use in sound reinforcement and studio recording. The SM58S variation comes with ...
1 x Triangular White Mic Flag
Product Code: Various
A three-sided triangular mic flag, suitable for microphone with 19 to 38 mm diameters.

More About This Product




Mic Flags

Mic Flags from Rycote on Vimeo.


Mic Flag Brochure.pdf
Reporter Mic Solutions

Mic Flag Brochure_08_14.pdf
Reporter Mic Solutions (update 08_14)

FAQ Categories


Product Code(s)

Single Triangular White Mic Flag

A three-sided, white, triangular mic flag, suitable for microphone with 19 to 38 mm diameters. (single)

Product Code: 107308

20 x Single Triangular White Mic Flag

A three-sided, white, triangular mic flag, suitable for microphone with 19 to 38 mm diameters. (x20)

Product Code: 107317