Rycote

Connbox CB3 (2XLR-3F)

Product Code: 016924

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 3 is suitable for most M/S stereo pairs with two 3-pin XLRs.


Main Benefits:

  • Isolates and minimises handling and cable-borne noise
  • Greatly improves audio quality of recordings
  • A ready-to-use solution to connection problems

Where to Buy
Sharing Options

An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings.

Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble.

The Connbox is made of the highest quality components, using Gold 3-pin Neutrik X-series XLR connectors, and an ultra soft Mogami star-quad cable.
INPUT
Input connector: 2 x XLR -3F
Input Connbox Connector: Hardwired
Input Cable outside diameter: 2.5mm
Input Cable Exposed Length: ch1 100mm, ch2 120mm
Input Cable Band Colour: Plain

OUTPUT
Output Connector: XLR – 5M
Output Connbox Connector: Hardwired
Output Cable Outside Diameter: 4.8mm
Output Cable Exposed Length: 400mm
Outout Cable Band Colour: Plain


Net Weight: 90g



AKG/Sennheiser CK94 / MKH 60Description currently unavailable.
AKG/Sennheiser CK94/ MKH 416Description currently unavailable.
AKG CK91/CK94The CK91 & CK94 are part of the Blue Line Series and they work exclusively with the SE300 B pre-amp module. Their robust Modulock...
Neumann KM120/KM140 (WKD-KM)Description
Schoeps/Sennheiser CMC / MKH 416Description currently unavailable.
Schoeps/Sennheiser MKH 60 / CMC Description currently unavailable.
Schoeps CMC M/S pair with CUT 1 filterFor more information on this specific microphone, visit Schoeps website at http://www.schoeps.de/en/home
Schoeps CMC M/S pair without CUT 1 filterFor more information on this specific microphone, visit Schoeps website at http://www.schoeps.de/en/home
Schoeps CMIT 5 / CMC 68For more information on this specific microphone, visit Schoeps website at http://www.schoeps.de/en/home
Sennheiser/AKG MKH 416 / CK 94Description currently unavailable.
Sennheiser/AKG MKH 60 / CK 94Description currently unavailable.
Sennheiser/Schoeps MKH 416 / CMCDescription currently unavailable.
Sennheiser/Schoeps MKH 60 / CMCDescription currently unavailable.
Sennheiser MKH 20An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output, switched pre-attenu...
Sennheiser MKH 30 / MKH 40 / MKH 20 / MKH 50 For more information on this specific microphone, visit Sennheisers website at http://en-uk.sennheiser.com
Sennheiser MKH 30 / MKH 60For more information on this specific microphone, visit Sennheisers website at http://en-uk.sennheiser.com
Sennheiser MKH 416 / MKH 30For more information on this specific microphone, visit Sennheisers website at http://en-uk.sennheiser.com
1 x Connbox CB3 (2XLR-3F)
Product Code: 016924
Suitable for most M/S stereo pairs with two 3-pin XLRs.

More About This Product




Connboxes (Mono & Stereo)

Connboxes (Mono & Stereo) from Rycote on Vimeo.


Stereo Windshield Kits

Stereo Windshield Kits from Rycote on Vimeo.


FAQ Categories


Product Code(s)

Connbox CB3 (2XLR-3F)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 3 is suitable for most M/S stereo pairs with two 3-pin XLRs.

Product Code: 016924

Similar Products